.. _setup_xm125_xe125:

Setting Up Your XM125/XE125
===========================

The XE125 is an evaluation board which has the XM125 module soldered onto it.
All you need to connect it to a PC is a USB-C cable (not provided by Acconeer).

.. _xm125-hw-overview:

Hardware Overview
-----------------

The image below depicts the XE125 from the front (left) and back (right).

.. figure:: /_static/hw_images/xe125_hw_overview.png
   :align: center
   :width: 80%

.. _xm125-finding-the-serial-port:

.. include:: find_serial_port.rst

Note that when the XE125 is connected to a PC, two virtual serial ports will appear:

* Enhanced
* Standard

Use the enhanced port (usually the first one) when connecting to the module from the Exploration Tool application.

.. include:: windows_com_port_drivers.rst
- XM125: `Silicon Labs <https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers>`_

Flashing
--------

.. |flash_section_content_evk| replace:: XM125

.. include:: flash_section_content.inc