.. _setup_xm126:

Setting Up Your XB122 + XM126
=============================

To evaluate the XM126 module, it is recommended to connect it to an XB122 break-out board to access different pins.
A Micro USB cable (not provided by Acconeer) is needed to connect the XB122 board to a PC.

.. _xm126-hw-overview:

Hardware Overview
-----------------

The image below depicts the XB122 from the front (left) and back (right).

.. figure:: /_static/hw_images/xb122_hw_overview.png
   :align: center
   :width: 80%

The image below depicts the XM126 from the front (left) and back (right).

.. figure:: /_static/hw_images/xm126_hw_overview.png
   :align: center
   :width: 80%

.. _xm126-finding-the-serial-port:

.. include:: find_serial_port.rst

.. include:: windows_com_port_drivers.rst
- XM126: `FTDI <https://ftdichip.com/drivers/vcp-drivers/>`_

On the page from the link above, go through the following steps to install the driver:

* Select Windows (Desktop)
* Click on ``setup executable``
* Extract the downloaded file
* Click on the extracted .exe file
* Follow the installation instructions

Flashing
--------

.. |flash_section_content_evk| replace:: XM126

.. include:: flash_section_content.inc